You are:
One-way valve Made in China.
Reliable and secure: Passage of the solution only to the patient
Ergonomics: Simple and efficient installation
Non-return valve: Low opening pressure, solution infused by gravity.
Opening pressure: P Gravity 0.3psi - 0.021 Bars - 21hPa.
Tip type: 1 luer lock male/1 luer lock female.
Color: transparent
Lipid-resistant.
Contact with 0.5% or 2% Chlorhexidine in 70° Isopropyl alcohol, without evaporation time, and while the luer lock is connected, therefore under physical stress, presents a significant risk of cracking of the luer lock, and should be avoided as much as possible.
In accordance with the recommendations of the SF2H (2019) and Didactic's disinfection protocol, it is always preferable to disinfect the connectors (when necessary) with 70° ethyl alcohol followed by a mandatory drying time of 15 secondes at least before connecting. 70° ethyl alcohol is just as effective disinfecting inert materials and then reduces the risk of altering plastic materials.
Indications
This device is used as an accessory for the infusion set or extension tube to prevent reflux into the primary line from secondary lines. For complex setups, gravity infusion and pump infusion, it is strongly recommended to position a non-return valve on the gravity infusion line.
Dispose according to the Member state regulation.
Used materials
PC
Silicone
Labeling
on each unit are written the reference, the lot/serial number, the sterilization method and the expiry date if applicable
medical device
sterile
conformity
Transport conditions
Protected from light and humidity
| Conditioning | Parts quantities | Dimensions in cm | Weight in kg | Ean 13 of conditioning |
| UNIT | 1 | 5 x 2 x 0 | 06972620110541 | |
| BOX | 200 | 16 x 14 x 18 | 0.430 | 16972620110548 |
| CASE | 4000 | 32 x 72 x 38 | 9.920 | 26972620110545 |