MALE STOPPER
You are:
Male obturators with injection site in Polycarbonate (PC) / Synthetic Polyisoprene.
Ergonomics: Simple and efficient installation.
Made in China.
Contact with 0.5% or 2% Chlorhexidine in 70° Isopropyl alcohol, without
evaporation time, and while the luer lock is connected, therefore under
physical stress, presents a significant risk of cracking of the luer
lock, and should be avoided as much as possible.
In
accordance with the recommendations of the SF2H (2019), disinfecting the
connectors (when necessary) with 70° ethyl alcohol is always
preferable, as it is just as effective in disinfecting inert materials
and there is much less risk of altering plastic materials.
Indications
This device is an infusion device or extension tube accessory, used to dose patients during infusion.
Dispose according to legislation in member state .
Used materials
STOPPER: in Polycarbonate / Synthetic polyisoprene.
Labeling
on each unit are written the reference, the lot/serial number, the sterilization method and the expiry date if applicable
medical device
sterile
conformity
Transport conditions
Protected from light and humidity
| Conditioning | Parts quantities | Dimensions in cm | Weight in kg | Ean 13 of conditioning |
| UNIT | 1 | 5 x 2 x 1 | 06972620110459 | |
| BOX | 200 | 16 x 14 x 18 | 16972620110456 | |
| CASE | 4000 | 72 x 34 x 38 | 26972620110453 |
