EXAMINATION GLOVES NON STERILE LATEX HIGH PROTECT 240MM POWDER-FREE MEDICAL DEVICE PPE CAT III- BOX OF 100 UNITS

  • The Polysem Medical non sterile latex examination gloves meet the technical specifications for a latex examination glove.
  • These gloves are rated as both a Class I medical device and Category III type B Personal Protective Equipment.
  • Low protein content

Description

The Polysem Medical examination gloves can be used in emergency units, in care units (urinary catheterization, repair of dressings, etc.) and also for small surgeries of very short duration.

PPE cat III and type B, provides very high protection against microorganisms and chemicals
Cuff size: 240 mm

Colour: cream white

 

Technical
information

Indications 
All procedures of short duration requiring an examination glove.

Used materials 
Latex and natural rubber - Vulcanising agent: Sulphur - Vulcanisation accelerators: ZDEC and ZMBT

Labeling 
on each unit are written the reference, the lot/serial number, the sterilization method and the expiry date if applicable

medical device 

  • MD class : I
  • MD notified body : NA
  • EU directive/regulation : 2017/745
  • annexe : IV

EPI 

  • european directive(s) - regulation(s) : 2016/425
  • IPE category : III
  • IPE notified body : 2777

sterile 

  • sterile : no

conformity 

  • Medical gloves for single use - Part 1: Requirements and testing for freedom from holes
  • Medical gloves for single use - Part 2: Requirements and testing for physical properties
  • Medical gloves for single use - Part 3: Requirements and testing for biological evaluation
  • Medical gloves for single use - Part 4: Requirements and testing for shelf life determination
  • Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied - Part 1: General requirements
  • Clothing for protection against contact with blood and body fluids. Determination of resistance of protective clothing materials to penetration by blood-borne pathogens. Test method using Phi-X174 Bacteriophage
  • Determination of material resistance to permation by chemicals - Part 1: permeation by liquid chemical under conditions of continuous contact
  • Protective gloves against chemicals and micro-organisms - Part 2 : determination of resistance to penetration
  • Protective gloves against chemicals and micro-organisms - Part 4 : determination of resistance to degradation by chemicals
  • Protective gloves against dangerous chemicals and micro-organisms - Part 1 : Terminology and performance requirements for chemical risks.
  • Protective gloves against dangerous chemicals and micro-organisms - Part 1 : Terminology and performance requirements for micro-organisms risks.

economic operator 

  • MANUFACTURER : DIDACTIC / 216 Rue Roland Moreno - 76210 Saint-Jean-de-

Logistics
information

Transport conditions 

Protected from light, humidity and at a temperature between 10 and 30 ° C

Conditioning Parts quantities Dimensions in cm Weight in kg Ean 13 of conditioning
UNIT 1

The Polysem Medical examination gloves can be used in emergency units, in care units (urinary catheterization, repair of dressings, etc.) and also for small surgeries of very short duration.

PPE cat III and type B, provides very high protection against microorganisms and chemicals
Cuff size: 240 mm

Colour: cream white

 

Indications 
All procedures of short duration requiring an examination glove.

Used materials 
Latex and natural rubber - Vulcanising agent: Sulphur - Vulcanisation accelerators: ZDEC and ZMBT

Labeling 
on each unit are written the reference, the lot/serial number, the sterilization method and the expiry date if applicable

medical device 

  • MD class : I
  • MD notified body : NA
  • EU directive/regulation : 2017/745
  • annexe : IV

EPI 

  • european directive(s) - regulation(s) : 2016/425
  • IPE category : III
  • IPE notified body : 2777

sterile 

  • sterile : no

conformity 

  • Medical gloves for single use - Part 1: Requirements and testing for freedom from holes
  • Medical gloves for single use - Part 2: Requirements and testing for physical properties
  • Medical gloves for single use - Part 3: Requirements and testing for biological evaluation
  • Medical gloves for single use - Part 4: Requirements and testing for shelf life determination
  • Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied - Part 1: General requirements
  • Clothing for protection against contact with blood and body fluids. Determination of resistance of protective clothing materials to penetration by blood-borne pathogens. Test method using Phi-X174 Bacteriophage
  • Determination of material resistance to permation by chemicals - Part 1: permeation by liquid chemical under conditions of continuous contact
  • Protective gloves against chemicals and micro-organisms - Part 2 : determination of resistance to penetration
  • Protective gloves against chemicals and micro-organisms - Part 4 : determination of resistance to degradation by chemicals
  • Protective gloves against dangerous chemicals and micro-organisms - Part 1 : Terminology and performance requirements for chemical risks.
  • Protective gloves against dangerous chemicals and micro-organisms - Part 1 : Terminology and performance requirements for micro-organisms risks.

economic operator 

  • MANUFACTURER : DIDACTIC / 216 Rue Roland Moreno - 76210 Saint-Jean-de-

Transport conditions 

Protected from light, humidity and at a temperature between 10 and 30 ° C

Conditioning Parts quantities Dimensions in cm Weight in kg Ean 13 of conditioning
UNIT 1

Video(s)

Request for technical documentation

  • Didactic formally undertakes not to sell, rent or exchange any personal information. In application of articles 39 and following of the law of January 6, 1978 modified relating to data processing and freedoms (CNIL), you have the right to access, delete and rectify information concerning related to you.